HVA Charge Controller for Wind Turbine Generators & Solar Panels

0 0
- stock arriving soon
Product prices and availability are accurate as of 2017-11-21 06:27:01 EST and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Thank you for examining the HVA Charge Controller for Wind Turbine Generators & Solar Panels. This item can be sent to you right away and securely. The HVA Charge Controller for Wind Turbine Generators & Solar Panels is among many wonderful products we supply at our rebate costs. Buy right now at our safe website, Solar Charger Outlet.

Key features of this controller are:

Microprocessor controlled -- This is very important for both stability and functionality.
User changeable settings -- Several controllers on the market set the dump level, and that's that!
Super High amp rating - **440 Amps, up to 10,000 watts. 440 amps surge, 125 amps continuous.
Works directly with 12, 24 or 48 volt systems. -- The relay contacts can handle open collector voltages of up to 120 volts.
High Contrast LED battery voltage. - Several controllers do not tell you what's going on - This one does!
High Contrast LED turbine amperage meter -- Measures 3 digits to the left of the decimal, 2 digits to the right.
Meters can be shut using the on/off switch.
Two factory installed, fully wired D/C breakers and disconnects.
Entire unit is wired and ready to go for both wind and solar.
Battery status LED
Push to test. -- Ever wonder if your controller & load are working OK?
Large (8" x 12") solid steel enclosure, with multiple conduit knockouts
Large enough terminal blocks that you can actually terminate large wire (See notes below.)
The electronics are fully isolated from the enclosure, no ground loops.
Draws almost no energy while monitoring (all electronics must use some power, to work -- this is a miser)
Reverse Polarity protected.

Can handle ten, 1000 watt wind turbines, or up to 125 Amps of continuous solar power, or both at the same time. Note that 440 amps is not continuous, but is limited to 20% duty time.

**150 amp heat activated breakers have been installed to limit continuous current to 150 amps. Instantaneous current handling of this unit not to exceed 440 amps.
**The solenoid in this unit has been tested to over 440 amps. We have installed two 150-amp breakers as a standard configuration.
440 Amp 10,000 Watt Diversion/Regulator Hybrid Controller Two High Contrast Meters (both Volts and Amps) Two D/C Breakers/Disconnects Fully wired, ready to go for both wind and solar Works directly with 12, 24, and 48 volt systems

Now your shopping encounter is going to be a lot more rewarding learning that you are being given the greatest cost offered on the HVA Charge Controller for Wind Turbine Generators & Solar Panels at Solar Charger Outlet. When you aspire to acquire high quality products at outstanding prices, our website offers this and also a lot more. As always, we appreciate you shopping with us!

Write a Review

Product Tags